Ikenuma Woven Kobobo Senki
Ikenuma Woven Kobobo Senki
Made in Hamamatsu Enshu Toyui weaving by the old-fashioned machine
Intro Korea, located in Western Shizuoka Prefecture, which has been prospered as a cotton production area by rich water and warm climate of the Tenryu River. Cotton cultivated farmers, including the sidellane cotton fabric, the Chinese cotton texture, the history of Chinese cotton dates back to the middle of the Edo period. The sales channel expanded by the activity of a cotton merchant in the Meiji self-time, and China has now known to the country. The stock of cotton fabric was dramatically increased due to the stock of Toyota Sakichi, who is the founder of the Toyota Group, is invented. In addition to revolutionizing the Japanese fiber industry, the power and weaving machine later, later the fiber machine business is based on its own development. The shuttle loom has developed as a weaving area where Japan is the original point of the technical power boasted by Japan, and the technology, which is the fastest fabric industry in Japan. Textile and cars, completely different products are connected by the same technology!
Some samples of the Enshu Meiji in Ikenuma Tori KoboOur shop also sells with Hagilet, washcloth, antique or meter selling of China. Since it is a small store, it is a part of the fabric, but if you are in stock at the store and sample, you will be able to take it and see it. Specifically this pattern, if you are a rule, please contact our shop If you have a stock of the desired fabric, take it in your hands and try it.
Once regular Wakai Classrooms using Enshu Meige are also held at any timeIn our shop, we will create a bag of rice, and onceJapanese court classHeld at any time. An Azuma bag and a thin Momonga coat finished with a single needle heart are also recommended for the gift for the important person!
Until you can
The manufacturing of Enshu cotton is covered in a division of labor.
Manufacturing of textiles seems to imagine the scene of the machine weave, but since the yarn is purchased and after the plane weave, it has been through a number of steps as shown in the figure below. And because there are professional craftsmen for each process and work at another factory, it is probably more time and effort than everyone thinks.
Then, let's look at the work of the work that can not usually be seen from here.
Well, the beginning of the yarn journey and starts.
1.綛 げ 綛 綛 綛
The yarns purchased from the manufacturer make a fixed amount of 綛 at a rising store for dyeing and gluing work. The 綛 refers to the yarn that became a bundle. The processing of the bundled thread end is all handed out while taking care not to solve the thread even if the yarn is involved in the later process.
2. Refining / staining
A vivid hand bundled 綛 will be sent to the chromataker. Since impurities such as the stem and leaf cases of the tapered stem and leaves are attached, the 綛 arrived at the chromataker is first washed with hot water. This process is good and good, and the oil and the oil are dropped to remove the impurities, so the color is firmly dyed.
In order to weave, it is a glue that glued to the warp to prevent the yarn by friction and prevent fluffing. Since this glue greatly affects the process after the product of the product, so, in consideration of the type of yarn, the amount of yarn, the weather, etc., a few kinds of pollen as a raw material are prepared each time.
Four. Tube winding
The glued 綛 is transported to the tube roller and will change the appearance to "Isho". If a retro machine takes a noise and moving once, it does not stop until all tubular winding is over. While the entire yarn can not come out, we will always wound about 20 pieces at the same time.
Intention is a process of properly adjusting the warp. If you make a mistake here, the pattern will be crazy, so the outers will carefully place it based on the drawing where the array of yarns is written. When the yarn pulled out from the machine is rolled up in a machine, the process is finally added to the end of the process.
6. Department (Hot)
Transport is a step of making a single warp with three parts such as droppers, 綜 (こ), and the (お). If you make a mistake of the thread, you will be able to get hurt because you can damage your fabric. About 1,000 full-chest warp is about 1,000. If you finish this patient, it is finally woven!
The yarn that was white turned the figure and reached the Ikenuma Woven Studio. If you put the warflain on the loom and install the parts in a fixed place, it is finally the beginning of the machine weave.
In order to weave all the warps wound on the beam, it takes about one month, and the weather of the yarn and looms changes daily, so the skilled workers are always weaving while making the machine's condition.
A white thread was a fabric with a lot of craftsmen's hand. And this time, we will change the appearance and miscellaneous goods and a new journey begins.
If you encounter Enshu cotton, please use it carefully if you meet in the hotel.
From Ikenuma Tori Kobobo Hattps://haTayachiori.shop-pro.jp/ COLUMN